Hunter GSP9700 Series, Operation Instructions Manual

Page: 90 / 157

Load roller data can be viewed by selecting “Show Runout & Road Force” from the
“Balance” primary screen.
4.2 Inflation Station
Inflation Station provides preset tire pressure setting to ensure accurate
Road Force® Measurement (before and after matching) and safe assemblies for final
mounting on the vehicle. The
GSP9720JLR can reduce as well as increase the tire
pressure.
Lift the hose from the storage position (while in the “Balance” or “Runout & Road
Force” screens) and the Inflation Station screen will automatically pop up.
Upon sensing that the air hose is attached to the valve stem, the tire pressure will
automatically be set to the target air pressure. The target air pressure is set by the
user, by using the control knob.
In cases of a tire with pressure below 15 psi, “Auto-Set Pressure” can be selected to
begin filling.
Press “Hold pressure” or “STOP” at any time to halt auto pressure setting.
Depending on “how far off,” the pressure is and how large the tire, the dialed-in
pressure will usually be reached in three or less air “bursts” or “exhausts.” When the
tire reaches the dialed-in pressure, the on-screen tire graphic will turn green.
The Inflation Station screen exits automatically when you remove the hose from the
valve stem, or if you manually exit via the softkeys.
82
x
Road Force® Measurement Procedures GSP9720JLR Wheel Balancer Operation Instructions