Range of values
Typical values
Parameter
Dial Backup Status
Any whole number
≥ 0
Data Packets Received
System Information page
The System Information page shown in
Figure 18: Terminal Status page (top part)
on page 26 provides system
information for the satellite modem such as ST name (modem name), Site ID (Site Id), and operational software version.
Figure 19: System Information page (top part)
Note:
Print the System Information page and save it. Click
Print this page
next to the printer icon. If you experience
a problem with your satellite modem this page may not be accessible. Information on this screen may be useful to
a Hughes Customer Care representative in helping you to resolve the problem.
The operational parameters listed on the System Information page are shown in a tabular format. The first (left) column
identifies the parameter categories:
•
Identification – Contains system ID information such as Site ID (installation site ID) and ST name (a unique name
that identifies the satellite modem).
•
Software – Contains version information on the various software applications resident on the satellite modem such
as commissioning and operational software. (Commissioning refers to initial start-up of the modem.)
•
Satellite – Contains information pertaining to communication with the satellite such as antenna size, transmit radio
wattage, and uplink transmission mode.
•
Addressing – Contains addressing information such as LAN port address and subnet mask and available public IP
addresses (if any, depending on your service plan).
26
System Control Center
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. B
Chapter 2
