4.
Ensure that both Client for Microsoft Networks and Internet Protocol (TCP/IP) are installed and checked in the Local
Area Connection properties dialog as shown in
Figure 37: Local Area Connection Properties Dialog – Windows
2000
on page 63.
Figure 49: Local Area Connection Properties Dialog – Windows 2000
5.
If NetBEUI is installed and checked, uncheck it or uninstall it.
6.
Highlight Internet Protocol (TCP/IP). Be careful not to uncheck the checkbox.
7.
Click
Properties
.
The Internet Protocol Properties dialog appears as shown in
Figure 38: Internet Protocol Properties – Windows
2000
on page 63.
Figure 50: Internet Protocol Properties – Windows 2000
8.
On the General tab, select Use the following IP address.
9.
Enter the IP address and Subnet mask.
If you do not know what public IP address or range of addresses is available for use, see
Understanding the modem
address and computer address
on page 49.
10.
Enter the satellite modem IP address in the Default Gateway field.
63
Appendix A
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. B
Computer settings
