Figure 17: Transmission Information page
The operational parameters listed on the Transmission Information page are shown in a tabular format. The first (left)
column identifies the parameter categories:
•
Satellite Interface Statistics – Contains information on transmit status and signal strength, as well as
transmission-related error messages.
•
Traffic Statistics: Transmit – Contains statistical information on the specific data transmitted to the satellite from
this satellite satellite modem.
Typical values for Transmission Information parameters
The following table lists typical values and the range of values for parameters on the Transmission Information page.
This information may help you understand the values displayed by your satellite modem.
To see the definition of any parameter, click the parameter name on the screen.
Table 9: Transmission Information parameters – typical values and range
Range of values
Typical values
Parameter
Satellite Interface Statistics (parameter category)
Up – The modem is transmitting
signals to the satellite.
Up
Transmit Status
Down – The modem is not transmitting
signals to the satellite.
Any whole number.
≥ 0
Tx Error
Not applicable (parameter reserved for
future use).
OK
Transmit Path Fault
Traffic Statistics: Transmit
22
System Control Center
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. B
Chapter 2
