TCP/IP (Transmission Control Protocol / Internet Protocol)
protocol suite
Protocol support
One Ethernet port supporting 10BaseT or 100BaseT
operation, RJ-45-switched
Interface ports
See
Power supply information
on page 4.
Power supplies and power requirements
Power supply information
The power supply is included in the satellite modem shipping carton.
Figure 5: Power supply for the HN9000 satellite modem
Before proceeding, make sure you have the correct power supply. Check the part number on the power supply and refer
to
Table 2: Power supply specifications for the HN9000 satellite modem
on page 4.
•
Always use the power supply provided with the satellite modem. The modem’s performance may suffer if the wrong
power supply is used.
•
The input must be 110/130 VAC.
•
A suitable surge protector is recommended to protect the satellite modem from possible damage due to power surges.
•
If the satellite modem is installed outside the United States or Canada, observe the power standards and requirements
of the country where it is installed.
Table 2: Power supply specifications for the HN9000 satellite modem
Power cord
Electrical requirements
Application
Power supply type and
part number
Detachable, for 110
VAC outlet type.
Input line voltage:
100 – 130 V, 2 A maximum
HN9000 satellite modem
with 1-W or 2-W radio
AC/DC, 73 W
P/N 1501006-0001
Input line frequency:
60 Hz AC
Rated power consumption: 73 W
Note:
The satellite modem should be continuously powered on unless it will not be used for an extended period.
4
Satellite modem overview
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. B
Chapter 1
