Hubner C-FLEX, Owner'S Manual

Page: 65 / 82

65 | 82
OWNERS MANUAL | C-FLEX | D0579-B DECEMBER 2019
AOM Driver Heat Sink
The AOM driver requires a heat sink providing a thermal resistance of < 1.2 K/W.
Power Supply Requirements
An appropriate System Power Supply Unit (PSU) is supplied with the C-FLEX laser combiner and can be plugged
into a standard power outlet. The power supply accepts 100-260 VAC and 47-63 Hz. Ripple and noise 1% peak-
peak max, 20 MHz bandwidth. Accepted voltage for C-FLEX is 15 VDC, 7 A. Specification values are given at 15
VDC.
AOM Power supply requirements
A 24V power supply for the AOM driver is also supplied and should be connected to the input VDC on the
AOM driver. A 5V power supply is supplied with the system to allow for generation of a simple constant TTL digital
‘ON’ state.