Hubner C-FLEX, Owner'S Manual

Page: 38 / 82

38 | 82
OWNERS MANUAL | C-FLEX | D0579-B DECEMBER 2019
21. Use the horizontal angle adjustment screw to sweep the beam across the pin hole. Measure the change
in power as the beam is swept and determine the direction of horizontal translation required to
maximize the power through the pin hole.
22. Adjust the horizontal position set screw of the steering mirror in the opposite direction of the horizontal
angular adjustment screw that resulted in increased power through the aperture pin hole. Use the
angular adjustment screws (both horizontal and vertical if necessary) to reoptimize power through the
pin hole.
In the example above the steering mirror is tilted forward by turning the horizontal angular adjustment screw
to the left, then the mirror is translated forward by turning both the horizontal position and vertical angular
adjustment screws to the right. Then the beam angle and power through the pin hole is restored by turning the
horizontal angular alignment screw to the right as well.