Hubner C-FLEX, Owner'S Manual

Page: 51 / 82

51 | 82
OWNERS MANUAL | C-FLEX | D0579-B DECEMBER 2019
Controlling Emission with Modulation Mode Operation
When C-FLEX is delivered with modulatable lasers or AOMs the modulation signal input connectors can be
found on the back panel of the laser combiner. The modulation of the Cobolt lasers requires an external signal
source, such as a function generator, to drive the modulation. Each of the laser lines with modulation capabilities
can be modulated individually using both analog and/or digital modulation, and in the case of 06-MLDs,
additionally with ON/OFF modulation. Modulation is not available for Cobolt 04-01 or 08-01 Series lasers
without an integrated AOM.
Connecting the modulation cables
This section describes how to properly connect modulation inputs for Cobolt 06-MLD , Cobolt 06-DPL lasers
with integrated modulation controls and Cobolt 04-01 or 08-01 laser which can be modulated using an AOM.
The modulation input signal generator and cables are not delivered with the C-FLEX.
Cobolt 06-MLD and 06-DPL modulation interface on C-FLEX
Cobolt 04-01 laser with AOM RF Input interface on C-FLEX
Cobolt 08-01 laser with AOM RF Input interface on C-FLEX