Hubner C-FLEX, Owner'S Manual

Page: 20 / 82

20 | 82
OWNERS MANUAL | C-FLEX | D0579-B DECEMBER 2019
NOTICE – The fixation bolts do not require the removal of any parts mounted within the C-FLEX!
Take care not to bump the mirrors, it may affect the alignment accuracy.
NOTICE – Use ONLY the delivered spring loaded bolts, improper mounting of the C-FLEX may
introduce mechanical stress that will have a negative impact on performance.
3. Use the provided fixation bolts and springs to fix the C-FLEX to the mounting surface, either directly
on the optical bench or on the heat sink. The fixation bolts are designed to hold the laser combiner in
place while allowing for thermal expansion during operation. Place the bolts in the order indicated on
the illustration and do not tighten completely until all three bolts are partially in place.
4. Replace the access panel before connecting the cables. Tighten all four screws to secure the access
panel safely in place.