Hubner C-FLEX, Owner'S Manual

Page: 13 / 82

13 | 82
OWNERS MANUAL | C-FLEX | D0579-B DECEMBER 2019
Laser Combiner Operation Instructions
This section will cover the step-by-step process of getting a C-FLEX installed and ready for use. It is intended to
be conceise and instructive. More elaborate information about system configuration, performance
specifications, environmental requirements and alignment principles can be found in sections 7 through 10. It is
important to get to know the specific C-FLEX configuration before attempting to install it.
To know which Cobolt lasers are built into the C-FLEX laser combiner refer to the test protocol delivered with
the C-FLEX.
Determine if the C-FLEX should have been delivered with auxillary equipment which will need to be installed at
the same time in order for the combiner to function.
If the C-FLEX has Cobolt 04-01 lasers included the answer is YES ! External controllers are required to run the
Cobolt 04-01 series lasers integrated into the C-FLEX. The controllers and all necessary cables are delivered with
the system.
If the C-FLEX has an integrated AOM, or possibly up to three, then the answer is also YES ! The AOM Driver and
all necessary cables are delivered with the system.