Huawei TP3206 Installation Manual Download Page 149

Page: 149 / 200

HUAWEI TP3206&TP3218&TP3218S Telepresence

Installation Guide

11 Installing the Front Panel Decorative Parts

Issue 05 (2014-08-01)

Huawei Proprietary and Confidential

144

Procedure

Step 1

Install the cable troughs and their covers, as shown in

Figure 11-1

Figure 11-1

Installing the cable trough and cover

With the grooved side of the cable trough facing upward, position the cable trough

against the center rack.

With the indented sides of the decorative parts facing downward, position the decorative

parts against the center rack and ensure that the decorative parts are aligned with the

mark lines on the center rack.

Step 2

Install the left and right decorative parts, as shown in

Figure 11-2

Figure 11-2

Installing the left and right decorative parts

Orient indented sides of the decorative parts downward and align the indents with the

center cable trough cover.

Summary of Contents for TP3206









































































































































































































Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands

Huawei TP3206, Installation Manual

Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands