Huawei TP3206 Installation Manual Download Page 16

Page: 16 / 200

HUAWEI TP3206&TP3218&TP3218S Telepresence

Installation Guide

4 Preparing for Installation

Issue 05 (2014-08-01)

Huawei Proprietary and Confidential

Table 4-1

Unpacking tools

Name

Illustration

Quan

tity

Specifications and Functions

Flat-head

screwdriv

Delivered with the telepresence

system.
Used to loosen screws from

packages.

Diagonal

pliers

Delivered with the telepresence

system.
Used to protect hands from injury.

Safety

gloves

Delivered with the telepresence

system.
Used to protect hands from injury.

Safety

glasses

Used to protect eyes from dust.

Pallet jack

Loading capacity: ≥ 200 kg. Used to

lift and move equipment.

Installation Tools

Table 4-2

lists the tools required for installing the telepresence system.

Table 4-2

Installation tools

Name

Illustration

Quan

tity

Specifications and Functions

Phillips

screwdriv

Delivered with the telepresence

system.

Phillips

screwdriv

er bit

Delivered with the telepresence

system.
Installed in the rechargeable electric

Summary of Contents for TP3206









































































































































































































Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands

Huawei TP3206, Installation Manual

Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands