Huawei TP3206 Installation Manual Download Page 6

Page: 6 / 200

HUAWEI TP3206&TP3218&TP3218S Telepresence

Installation Guide

1 About This Document

Issue 05 (2014-08-01)

Huawei Proprietary and Confidential

About This Document

Overview

This document describes the tools and steps for installing the HUAWEI TP3206, TP3218, or

TP3218S telepresence system (telepresence system for short).
The HUAWEI TP3206, TP3218, and TP3218S have basically the same quantity of and

installation method for most of their components (except their multi-functional conference

tables).



The TP3206 has only one row of multi-functional conference tables with three tabletop

segments and six seats.



The TP3218 has two rows of multi-functional conference tables. The front row is the

same as that of the TP3206. The second row has six tabletop segments and 12 seats.



The TP3218S has two rows of multi-functional conference tables. The front row is the

same as that of the TP3206. The second row has four tabletop segments and eight seats.

Intended Audience

This document is primarily intended for:



Technical support engineers



Huawei resellers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Alerts you to a high risk hazard that could, if not avoided,

result in serious injury or death.

Alerts you to a medium or low risk hazard that could, if not

avoided, result in moderate or minor injury.

Alerts you to a potentially hazardous situation that could, if

not avoided, result in equipment damage, data loss,

performance deterioration, or unanticipated results.

Summary of Contents for TP3206









































































































































































































Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands

Huawei TP3206, Installation Manual

Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands