Huawei TP3206 Installation Manual Download Page 146

Page: 146 / 200

HUAWEI TP3206&TP3218&TP3218S Telepresence

Installation Guide

10 Installing the Second Row of the Multi-Functional

Conference Table

Issue 05 (2014-08-01)

Huawei Proprietary and Confidential

141

Figure 10-17

Placing cable troughs in order

Step 2

Connect cables.
For cable connection details, see the

HUAWEI TP3206_TP3218S_TP3218 Cable Connection

Guide

Step 3

Place the decorative parts in the cable troughs.

Install the decorative parts marked in the red rectangles shown in

Figure 10-18

first. If you install other

decorative parts first, you will not be able to install those marked in red.

Figure 10-18

Installing cable trough decorative parts

Step 4

Secure the decorative parts to the cable troughs using two M6 x 25 countersunk screws, as

shown in

Figure 10-19

Summary of Contents for TP3206









































































































































































































Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands

Huawei TP3206, Installation Manual

Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands