Huawei TP3206 Installation Manual Download Page 49

Page: 49 / 200

HUAWEI TP3206&TP3218&TP3218S Telepresence

Installation Guide

7 Installing HD Displays

Issue 05 (2014-08-01)

Huawei Proprietary and Confidential

No.

Name

Quantity

HD display support (A12)

6 x 2

NOTE

Two types of HD

displays are

available, and they

correspond to

different supports.

The two types of

supports are both

delivered with the

telepresence system.

Upper right spacer (A13)

Upper left spacer (A14)

Lower right spacer (A18)

Lower left spacer (A19)

Front panel handle (A15)

M6 x 16 screw

Several

7.2 Installation Procedure

Prerequisites

Ensure that:



The HD displays can be powered on correctly and that the video sources can be switched

without erratic display.



The installation site is clear, and no obstacles or sharp objects, which may scratch the

screens, are around the HD displays.



All cables to be used for connecting the HD displays to other devices are labeled.

Background

The HD displays are large and heavy. At least two persons required to lift or move them. Be

careful when lifting or moving the HD displays.

The three HD display bases (A11) are identical, and each can be installed onto any of the

three HD displays. Before installing the bases, remove the protective films from the HD

displays.

Summary of Contents for TP3206









































































































































































































Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands

Huawei TP3206, Installation Manual

Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands