Huawei TP3206 Installation Manual Download Page 30

Page: 30 / 200

HUAWEI TP3206&TP3218&TP3218S Telepresence

Installation Guide

4 Preparing for Installation

Issue 05 (2014-08-01)

Huawei Proprietary and Confidential



If items included differ from those listed in the table, contact the local Huawei

representative office.



If any connector is damaged or loosened, or any cable is scratched, repair or replace the

cable.

Table 4-13

Item checklist for the equipment

Category

Item

Requirements

Telepresence

devices

Appearance

The appearance is tidy without scratches, loose

mechanical parts, or damage.

Interior

No foreign objects or water stains exist.

Interior cable

The cables are bound up in order. No cables are

disconnected or damaged.

Silkscreen

The silkscreen is clear and identifiable.

Connector

The connectors are in good condition with straight

contact pins.

Mechanical

part

Appearance

The appearance is tidy without scratches, loose

mechanical parts, or damage.

Quantity

The quantity is consistent with that in the shipping list.

Interior cable

Appearance

The cables are tidy, and none are missing.

Connector

The connectors are secure. All connectors are plugged in

correctly.

The interior cables have been installed before delivery. Only exterior cables need to be installed onsite.

4.5 Screw List

Table 4-14

lists the screws delivered with your telepresence system.

Table 4-14

Screw list

Name

Illustration

Specifications and Functions

M6 x 16

socket-head

cap screw

Thread specifications: M6. Length:

16 mm.
Used to secure the rack components

and steel frames and steel plates on

Summary of Contents for TP3206









































































































































































































Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands

Huawei TP3206, Installation Manual

Search results

Summary of Contents for TP3206

Reviews:

Related manuals for TP3206

Brands by name

Popular brands