HUAWEI TP3206&TP3218&TP3218S Telepresence
Installation Guide
8 Installing the First Row of the Multi-Functional
Conference Table
Issue 05 (2014-08-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
78
When fixing the tabletop displays, wear safety glasses to prevent dust from entering your
eyes.
1.
Insert four M6 x 25 countersunk screws into the screw holes in the tabletop displays
through the securing tabs, and partially tighten the screws.
2.
Adjust the height of the tabletop displays until they are flush with the tabletop.
a.
Arrange one person to monitor the height of the tabletop displays.
b.
Arrange another person under the conference table to adjust the four screws circled
in red in
. Turn the screws anticlockwise to lower the tabletop display
and clockwise to raise the tabletop display.
Figure 8-22
Adjusting the tabletop display height 3.
3.
Adjust the gaps between the edges of the tabletop displays and the tabletop to ensure that
the gaps around the edges, other than the leading edge of the table top display
mechanism, furthest to conference participants, are even and the gap around the leading
edge is larger than the other gaps.
a.
Arrange one person to hold the tabletop display under the conference table and
adjust its position.
b.
Arrange another person to watch the gaps between the edges of the tabletop displays
and the tabletop.
4.
Fully tighten the screws, as shown in
