Huawei TE80 Administrator'S Manual Download Page 11

Page: 11 / 178

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide

1 Overview

Issue 02 (2014-03-30)

Huawei Proprietary and Confidential

Category

No.

Item

Description

located.

Networking condition

Record the network topology
and hardware connection
diagram that include every
device.

Endpoint information

List the IP address, user name,
and password for the endpoint
so you can quickly log in to the
endpoint in case of an
emergency. If you are not
permitted to record the
password for security reasons,
memorize it.

Software
and tools

Software versions and tools

List the software versions
corresponding to the endpoint.

Prepare troubleshooting tools.

Contact
information

Purchased parts' service
information

Record the manufacturer
contact information, serial
numbers, and manufacturers'
warranty clauses for purchased
parts.

Technical support personnel's
contact information

Maintain a list of technical
support personnel with their
contact information and
responsibilities.

Spare parts

List all spare parts (including
the spare parts that Huawei can
provide) and corresponding
procurement methods.

Redundant or temporary devices List all redundant or temporary

devices in the system, such as
standby file servers and
database servers.

1.3 Safety Precautions

For safety purposes, carefully read through these safety precautions and observe them during
operation.

Basic Precautions



Keep the device dry and secure from collision during storage, transportation, and
operation of the device.

Summary of Contents for TE80



















































































































































































Search results

Summary of Contents for TE80

Reviews:

Related manuals for TE80

Brands by name

Popular brands

Huawei TE80, Administrator'S Manual

Search results

Summary of Contents for TE80

Reviews:

Related manuals for TE80

Brands by name

Popular brands