Huawei TE80 Administrator'S Manual Download Page 22

Page: 22 / 178

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide

2 Basic Configuration and Verification

Issue 02 (2014-03-30)

Huawei Proprietary and Confidential

Verification Result



If you successfully place a call to the remote site using its IP address, the IP network is
functioning properly.



If you successfully place a call to an H.323 site, the endpoint has registered with the GK
server.



If you successfully place a call to a SIP site, the endpoint has registered with the SIP
server.

2.3.2 Sound Test

By performing a sound test, you can check whether the audio input and output of the endpoint
is correct.

Prerequisites



The endpoint has been connected to an audio input device such as a microphone.



The endpoint has been connected to an audio output device, such as a speaker, or
connected to a television using an HDMI cable.

Procedure

Step 1

Choose

Advanced

Diagnostics

Sound and Color Bar Test

from the option bar.

Step 2

Select

Sound Test

----End

Verification Result



If the speaker emits a "ding ding" tone when there is no audio input, the audio output of
the endpoint is correct.



If audio inputs, for example human voices, are received from the microphone and the
speaker emits the voices, the audio input and output of the endpoint are correct.

2.3.3 Image Test

By performing an image test, you can check whether the video input and output of the
endpoint is correct.

Prerequisites

The endpoint has been connected to video sources and a display device.

Procedure

Step 1

Choose

Advanced

Settings

Video

Common Settings

Video Input

from the option

bar. Set the

Video Source

parameter to the video input ports to which video sources are

connected.

Step 2

Check whether the videos from connected video sources are correctly displayed on the display
device.

----End

Summary of Contents for TE80



















































































































































































Search results

Summary of Contents for TE80

Reviews:

Related manuals for TE80

Brands by name

Popular brands

Huawei TE80, Administrator'S Manual

Search results

Summary of Contents for TE80

Reviews:

Related manuals for TE80

Brands by name

Popular brands