Huawei TE80 Administrator'S Manual Download Page 104

Page: 104 / 178

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide

7 Security

Issue 02 (2014-03-30)

Huawei Proprietary and Confidential

Parameter

Description

Setting

security and prevents information
disclosure.

The default user name and
password for logging in to the
endpoint in SSH mode are

debug

and

Change_Me

respectively.

To protect against unauthorized
access, change the password at
your first login.



A maximum of three users is allowed to simultaneously log in to the endpoint in SSH mode.



A maximum of seven users is allowed to simultaneously log in to the endpoint in SSH and Telnet
modes.

Step 2

Select

Save

----End

7.4 Setting the Upgrade Password

You can set the password required to upgrade the endpoint software using the upgrade tool.

Step 1

Choose

Advanced

Settings

Secured

Upgrade password

. Set the upgrade password

parameters described in

Table 7-4

Table 7-4

Upgrade password

Parameter

Description

Setting

Upgrade
password

Specifies the password required to
upgrade your endpoint software
using the upgrade tool.

Default value:

Change_Me

The password contains 6 to 32
characters. In addition, it must
include at least two of the
following: uppercase letter,
lowercase letter, digit, or special
character.

To improve device security, set a
password at your first login.

Step 2

Choose

Save

----End

7.5 Setting the Air Content Sharing Password

When connecting to the endpoint, an air content sharing client must provide the predefined
password.

Summary of Contents for TE80



















































































































































































Search results

Summary of Contents for TE80

Reviews:

Related manuals for TE80

Brands by name

Popular brands

Huawei TE80, Administrator'S Manual

Search results

Summary of Contents for TE80

Reviews:

Related manuals for TE80

Brands by name

Popular brands