HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
3 Network
Issue 02 (2014-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30
Parameter
Description
Setting
this parameter. If you set
Encryption
mode
to
NONE
, the Wi-Fi network
provided by your endpoint is open to
everyone.
Password
Specifies the password used by other
devices to connect to your endpoint.
The required password varies
depending on your settings of
Encryption mode
.
If you set
Encryption mode
to
AES
or
TKIP
, the default
value of the password is
Change_Me
.
If you set
Encryption mode
to
WEP
, the default value
of the password is
wifi_ap_wep_1
.
If you set
Encryption mode
to
NONE
, the Wi-Fi
network provided by your
endpoint is open to
everyone.
Local IP
address
Subnet mask
Specify the IP address and subnet mask
of your endpoint.
Default values:
Local IP address
:
192.168.2.1
Subnet mask
:
255.255.255.0
DHCP
Specifies whether your endpoint assigns
IP addresses to devices connected to it.
NOTE
If you select this parameter, you must also set
Start IP address
and
End IP address
.
This parameter is selected by
default.
Start IP
address
End IP
address
Specify the IP address segment for the
devices connected to your endpoint.
Default values:
Start IP address
:
192.168.2.10
End IP address
:
192.168.2.100
Step 3
Select
Save
.
In the
Connected devices
list box, you can view the MAC and IP addresses of all the devices
connected to your endpoint.
----End
