HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
2 Basic Configuration and Verification
Issue 02 (2014-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
Parameter
Description
Setting
where your site is located.
Time format
Specifies the format in which time is
displayed.
Default value:
24-hour
System time
Specifies the system time.
Set the system time to your
local time to ensure appropriate
use of system functions, such
as joining conferences on time
and recording accurate event
occurrence time in logs.
Step 3
Select
Next
, Set the H.323 parameters described in
Step 4
Select
Next
. Set the Session Initiation Protocol (SIP) parameters described in
Step 5
Select
Next
. Set the video input parameters described in
Step 6
Select
Save
.
----End
2.3 Verifying the Basic Configuration
After completing the basic configuration, you must verify it by performing call, sound, and
image tests.
2.3.1 Call Test
By performing a call test, you can check whether the network is functioning and whether the
endpoint has registered with the GK or SIP server.
Procedure
Step 1
Press
on the remote control.
The call screen is displayed.
Step 2
In the text box, enter the IP address or number of a remote site.
Step 3
On the remote control, press
or
to place a call to the remote site.
----End
If you have selected the
Enable GK
or
Register with server
parameter and set other required
parameters but the endpoint fails to register with the GK or SIP server,
or
is
displayed in the lower right corner of the call screen.