Huawei Quidway S5600 Operation Manual Download Page 946

Page: 946 / 991

Operation Manual – System Maintenance and Debugging
Quidway S5600 Series Ethernet Switches-Release 1510

Chapter 1 BootROM and Host Software Loading

Huawei Technologies Proprietary

1-13

331 Give me your password, please

Password:

230 Logged in successfully

[ftp] get s5600.btm

[ftp] bye

Note:

When using different FTP server software on PC, different information will be output to

the switch.

Step 2: Update the BootROM program on the switch.

<Quidway>boot bootrom s5600.btm

This will update BootRom file on unit 1. Continue? [Y/N] y

Upgrading BOOTROM, please wait...

Upgrade BOOTROM succeeded!

Step 3: Restart the switch.

<Quidway> reboot

Note:

Before restarting the switch, make sure you have saved all other configurations that

you want, so as to avoid losing configuration information.

Loading host software

Loading the host software is the same as loading the BootROM program, except for

that the file to be downloaded is the host software file, and that you need to use the

boot boot-loader

command to select the host software at reboot of the switch.

After the above operations, the BootROM and host software loading is completed.

Pay attention to the following:

The loading of BootROM and host software takes effect only after you restart the

switch with the

reboot

command.

If the space of the Flash memory is not enough, you can delete the useless files in

the Flash memory before software downloading.

No power-down is permitted during software loading.

Summary of Contents for Quidway S5600
































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Quidway S5600

Reviews:

Brands by name

Popular brands

Huawei Quidway S5600, Operation Manual

Search results

Summary of Contents for Quidway S5600

Reviews:

Brands by name

Popular brands