Operation Manual – Port Security & Port Binding
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 1 Port Security Configuration
Huawei Technologies Proprietary
1-5
Operation
Command
Description
Set the
corresponding
action that the
device will take
after the Intrusion
Protection feature
is enabled.
port-security intrusion-mode
{
disableport
|
disableport-temporarily |
blockmac
}
Required
No specific intrusion
detection mode is
configured by default.
Configure not to
apply the
authorization
information
delivered by the
server on the
current port
port-security authorization
ignore
Optional
By default, the authorization
information delivered by the
server is applied on the
port.
Return to system
view
quit
-
Set the timer for
temporarily
disabling a port
port-security timer
disableport timer
Optional
Defaults to 20 seconds.
Note:
The time set by the
port-security timer disableport timer
command is the same as
the time set for temporarily disabling a port while executing the
port-security
intrusion-mode
command under
disableport-temporarily
mode.
With the port security enabled, a device has the following restrictions on the 802.1x
authentication and MAC address authentication in order to prevent conflictions.
1) The access control mode (set by the
dot1x port-control
command) is
automatically set to auto.
2) The
dot1x
,
dot1x port-method
,
dot1x port-control
, and
mac-authentication
commands are inapplicable.
