Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 2 Logging in through the Console Port
Huawei Technologies Proprietary
2-9
2.5 Console Port Login Configuration with Authentication
Mode Being Password
2.5.1 Configuration Procedure
Table 2-6
Console port login configuration with the authentication mode being
password
Operation
Command
Description
Enter system view
system-view
—
Enter AUX user
interface view
user-interface
aux
0
—
Configure to
authenticate users
using the local
password
authentication-m
ode password
Required
By default, users logging into a switch
through the Console port are not
authenticated; while those logging in
through Modems or Telnet are
authenticated.
Set the local
password
set
authentication
password
{
cipher
|
simple
}
password
Required
Set the
baud rate
speed
speed-value
Optional
The default baud rate of an AUX port
(also the Console port) is 9,600 bps.
Set the
check
mode
parity
{
even
|
mark
|
none
|
odd
|
space
}
Optional
By default, the check mode of a
Console port is set to
none
, that is, no
check bit.
Set the
stop bits
stopbits
{
1
|
1.5
|
2
}
Optional
The default stop bits of a Console port
is 1.
Configur
e the
Console
port
Set the
data bits
databits
{
7
|
8
}
Optional
The default data bits of a Console port
is 8.
Configure the
command level
available to users
logging into the user
interface
user privilege
level level
Optional
By default, commands of level 3 are
available to users logging into the
AUX user interface.
Make terminal
services available to
the user interface
shell
Optional
By default, terminal services are
available in all user interfaces.
