Huawei Quidway S5600 Operation Manual Download Page 540

Page: 540 / 991

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510

Chapter 1 AAA & RADIUS & HWTACACS

Configuration

Huawei Technologies Proprietary

1-10

The basic message exchange procedure is as follows:

A user requests access to the switch; the TACACS client sends an authentication

start request packet to TACACS server upon receipt of the request.

2) The TACACS server sends back an authentication response requesting for the

username; the TACACS client asks the user for the username upon receipt of the

response.

3) The TACACS client sends an authentication continuance packet carrying the

username after receiving the username from the user.

4) The TACACS server sends back an authentication response, requesting for the

password. Upon receipt of the response, the TACACS client requests the user for

the login password.

5) After receiving the login password, the TACACS client sends an authentication

continuance packet carrying the login password to the TACACS server.

6) The TACACS server sends back an authentication response indicating that the

user has passed the authentication.

7) The TACACS client sends the user authorization request packet to the TACACS

server.

8) The TACACS server sends back the authorization response, indicating that the

user has passed the authorization.

9) Upon receipt of the response indicating an authorization success, the TACACS

client pushes the configuration interface of the switch to the user.

10) The TACACS client sends an accounting start request packet to the TACACS

server.

11) The TACACS server sends back an accounting response, indicating that it has

received the accounting start request.

12) The user logs out; the TACACS client sends an accounting stop request to the

TACACS server.

13) The TACACS server sends back an accounting stop packet, indicating that the

accounting stop request has been received.

1.2 Configuration Tasks

Table 1-4

Configuration tasks

Operation

Description

Related section

Create an ISP domain

Required

Section

1.3.2

“Creating an ISP
Domain”

AAA
configuration

Configure the attributes of
the ISP domain

Optional

Section

1.3.3

“Configuring the
Attributes of an ISP
Domain”

Summary of Contents for Quidway S5600
































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Quidway S5600

Reviews:

Brands by name

Popular brands

Huawei Quidway S5600, Operation Manual

Search results

Summary of Contents for Quidway S5600

Reviews:

Brands by name

Popular brands