Huawei Quidway S5600 Operation Manual Download Page 33

Page: 33 / 991

Operation Manual - CLI
Quidway S5600 Series Ethernet Switches-Release 1510

Chapter 1 CLI Overview

Huawei Technologies Proprietary

1-11

Display suspending. That is, the displaying of output information can be paused

when the screen is full and you can then perform the three operations listed in

Table 1-5 as needed.

Table 1-5

Displaying-related operations

Operation

Function

Press <Ctrl+C>

Suspend displaying and executing.

Press the space key

Scroll the output information up by one page.

Press <Enter>

Scroll the output information up by one line.

1.3.3 Command History

CLI can store the latest executed commands as history commands so that users can

recall and execute them again. By default, CLI can store 10 history commands for each

user. Table 1-6 lists history command-related operations.

Table 1-6

Access history commands

Operation

Description

Display history
commands

Execute the

display

history-command

command

This command displays valid
history commands.

Recall the previous
history command

Press the up-arrow key
or <Ctrl+P>

This operation recalls the
previous history command (if
available).

Recall the next
history command

Pressing the down-arrow
key or <Ctrl+N>

This operation recalls the next
history command (if available).

Note:

As the Up and Down keys have different meanings in HyperTerminal running on

Windows 9x, these two keys can be used to recall history commands only in

terminals running Windows 3.x or Telnet running in Windows 3.x. You can press

<Ctrl + P> or <Ctrl + N> in Windows 9x to achieve the same purpose.

If you enter and execute the same command successively for multiple times, only

the first command is buffered.

Summary of Contents for Quidway S5600
































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Quidway S5600

Reviews:

Brands by name

Popular brands

Huawei Quidway S5600, Operation Manual

Search results

Summary of Contents for Quidway S5600

Reviews:

Brands by name

Popular brands