Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches
Chapter 2 QoS Profile Configuration
Huawei Technologies Proprietary
2-3
Operation
Command
Description
Add priority remark
actions
traffic-priority inbound
acl-rule
{ {
dscp
dscp-value
|
ip-precedence
{
pre-value
|
from-cos
} } |
cos
{
pre-value
|
from-ipprec
}
|
local-precedence
pre-value
}*
Optional
Quit current view
quit
—
Enter Ethernet port
view
interface
interface-type
interface-number
—
Configure the
application mode of
QoS profile on the
current port to
port-based
qos-profile port-based
By default, the application
mode of QoS profile is
user-based.
z
If MAC-address-based
authentication is
configured in 802.1x, the
application mode of QoS
profile must be
user-based.
z
If port-based
authentication is
configured in 802.1x, the
application mode of QoS
profile must be
port-based.
Display the
configurations of QoS
profiles
display qos-profile
{
all
|
name
profile-name
|
interface
interface-type
interface-number
|
user
user-name
}
Optional
You can execute the
display
command in any view
acl-rule
: Applied ACL rules which can be the combination of various ACL rules. The
way of combination is described in Table 1-9.
Note:
If a QoS profile has been applied on a port, the switch does not allow your deletion of
this QoS profile.
2.3.3 Configuration Example
I. Network requirements
The switch implements the QoS profile function for the access users.
