IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
6 Routine Maintenance
Issue 02 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
86
Parameter
Description
Password
Password for registering the camera with the
platform.
NOTICE
The value of this parameter must be the same as the
registration password configured on the platform. If they are
different, the IPC will fail to be connected to the platform.
Active
SDK
registratio
n
Registration type
The options are as follows:
Single-server mode: Select this option when the
platform server is deployed in single-node system
mode.
Dual-server mode: Select this option when the
platform server is deployed in two-node cluster
mode.
IP address
IP address of the platform server.
Port number
Port number of the platform server.
Device ID
Device ID, which uniquely identifies a device.
NOTICE
The value of this parameter must be the same as the device
ID configured on the platform. If they are different, the IPC
will fail to be connected to the platform.
Step 4
Click
Save
.
----End
6.3 Configuring ONVIF Parameters
You can change the Open Network Video Interface Forum (ONVIF) password and configure
the ONVIF media stream.
The ONVIF parameter takes effect only when you select
Enable
in the upper left corner of
the page.
Choose
Settings
>
System Configuration
>
ONVIF Parameters
.
The
ONVIF Parameters
page is displayed, as shown in
Figure 6-2
.
