IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
5 Device Configuration
Issue 02 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
45
When the frame rate is set to 60 fps and the behavior analysis is enabled, the camera performance will
be deteriorated and image freezing and artifacts will appear on live video feeds. It is recommended that
you do not set the frame rate to 60 fps when the behavior analysis is enabled.
Step 1
Choose
Settings
>
Intelligent Analysis
>
Behavior Analysis Switch
.
The
Behavior Analysis Switch
page is displayed, as shown in
Figure 5-9
.
Figure 5-9
Behavior Analysis Switch tab page
Step 2
Select
Enable
.
Step 3
When the behavior analysis switch is enabled, set related parameters. For details, see
Table
5-7
.
Table 5-7
Parameter description
Parameter
Description
Setting
Show full target
information
Includes the object movement tracks
(you must select
Enable target tracing
)
and the box generated when the object is
detected.
If you select it, information about all
objects in the entire surveillance site
is displayed.
If you deselect it, only information
about all objects in the surveillance
area is displayed.
-
Scenario mode
Surveillance scenario. You can select a
scenario mode based on the camera
surveillance mode.
Distant object
: outdoor scenario.
Close-up object
: indoor scenario.
[Default value]
Close-up object
Min. object size Minimum object size for generating
alarms.
This parameter specifies the minimum
[Default value]
Medium (20 x 20)
