Huawei IPC6521-Z20-FI User Manual Download Page 49

Page: 49 / 134

IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide

5 Device Configuration

Issue 02 (2013-09-30)

Huawei Proprietary and Confidential



You must save the operations on an area for the settings to take effect. You can perform operations
on an area at a time.



A maximum of eight privacy mask areas can be added.



The privacy mask area will not change with the PTZ camera rotation.

Step 2

Click

Save

Step 3

Go to the

Preview

page and check whether the location and size of the privacy mask area on

the live video image meet the requirements.



If yes, the configuration is complete.



If no, configure the privacy mask area again.

----End

Deleting a Privacy Mask Area

Step 1

In the

Area NO.

area, select a privacy mask area to delete.

The selected area changes from red to white.

Step 2

Click

Delete

The privacy mask area is deleted.

----End

5.2.7 Configuring Motion Detection Parameters

An alarm is generated when an object moves within the specified surveillance range of the
camera or the camera sways.

Going to the Page for Setting Motion Detection Parameters

Choose

Settings

Channel Configuration

Motion Detection Parameters

, The page for

setting motion detection parameters is displayed, as shown in

Figure 5-7

Figure 5-7

Motion detection Parameters tab page

Summary of Contents for IPC6521-Z20-FI







































































































































Search results

Summary of Contents for IPC6521-Z20-FI

Reviews:

Related manuals for IPC6521-Z20-FI

Brands by name

Popular brands

Huawei IPC6521-Z20-FI, User Manual

Search results

Summary of Contents for IPC6521-Z20-FI

Reviews:

Related manuals for IPC6521-Z20-FI

Brands by name

Popular brands