IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
5 Device Configuration
Issue 02 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65
Procedure
Step 1
Choose
Settings
>
Network Configuration
>
IP Filter
.
The
IP Filter
page is displayed, as shown in
Figure 5-18
.
Figure 5-18
IP Filter page
Step 2
Click
Add
.
The
Add filter rule
page is displayed, as shown in
Figure 5-19
.
Figure 5-19
Add filter rule page
Step 3
Set
IP addresses
,
Subnet mask
,
Port range
, and
Protocol type
.
Both the start and end port numbers must be within the range of 0 to 65535, and the start number
must be equal to or less than the end port number.
If you select
All
, all port numbers within the range of 0 to 65535 are filtered.
Step 4
Click
OK
.
You can click
Modify
and modify the filter rule on the
Modify filter rule
page that is displayed.
You can click
Delete
to delete the filter rule.
Step 5
Click
Save
.
Step 6
Select
Enable
.
----End
