IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
5 Device Configuration
Issue 02 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43
Enabling Motion Detection
To enable motion detection, select
Enable
.
Adding a Motion Detection Area
Step 1
Click
Add
. Draw a motion detection are on the live video image.
You can draw a motion detection area at a time. To add more motion detection areas, click
Add
.
A maximum of eight motion detection areas can be added.
Step 2
Set parameters according to
Table 5-6
.
Table 5-6
Parameter description
Parameter
Description
Setting
Alarm check
interval
Interval for the system checking for
object motion with the surveillance range
of the camera.
NOTE
If an object keeps moving in the surveillance
range of the camera, an alarm is generated at
each interval.
[Value range]
An integer ranging from 1 to
256
[Default value]
5
Sensitivity
Sensitivity of motion detection.
[Value range]
An integer ranging from 1 to
5
[Default value]
3
NOTE
A larger value indicates a
higher sensitivity. The highest
sensitivity level is 5. To detect
slight motion, you are advised
to set the sensitivity to a larger
value.
Step 3
Click
Save
.
The motion detection area is configured.
----End
Deleting a Motion Detection Area
Step 1
Select a motion detection area on the live video image.
The selected area changes from red to white.
Step 2
Click
Delete
.
To delete all motion detection areas, click
Delete all
.
