IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
5 Device Configuration
Issue 02 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
49
To change the tripwire direction, select the ID of the tripwire to modify, and move the mouse pointer
to the tripwire. When the mouse pointer changes to the
icon, right-click the tripwire and
choose a tripwire direction.
A surveillance area can have a maximum of 10 angles.
A behavior analysis function supports a maximum of four surveillance areas, and all behavior
analysis functions support a maximum of ten surveillance areas.
A maximum of five tripwires can be specified.
You can perform operations in one surveillance area at a time.
Limitation on the behavior analysis objects: A maximum of 30 objects can be analyzed in distant
object mode, and a maximum of 15 objects can be analyzed in close-up object mode.
Limitation on object size (the resolution of 352 x 288 is used as an example): A minimum size of 10
x 10 is supported. A maximum size of 100 x 100 is supported in distant object mode. A maximum
size of 100 x 200 is supported in close-up object mode. The value indicates the area, not the
limitation on length and height.
Step 5
Set
Name
.
Step 6
Click
Save
.
The behavior analysis setting are complete.
----End
5.3.3 Configuring the Intrusion Detection Function
The intrusion detection function checks whether an object enters a sensitive area (a key
surveillance area for which behavior analysis rules have been configured). The system
generates an alarm when an object enters a sensitive area.
Prerequisite
Enable the behavior analysis function. For details, see
5.3.1 Enabling Behavior Analysis
Switch
.
After clicking a domain or a link to jump to a required page, you can press
Alt+←
(left arrow key) to
return to the previous page.
Procedure
Step 1
Log in to the eSpace IP camera (IPC) web page as the system administrator.
Step 2
Choose
Settings
>
Intelligent Analysis
>
Behavior Analysis Parameters
.
The
Behavior Analysis Parameters
page is displayed.
Step 3
Set
Behavior type
to
Intrusion detection
, as shown in
Figure 5-11
.
