Huawei ES3000 V5 User Manual Download Page 185

Page: 185 / 248

Table A-28

Querying the maximum available capacity of the SSD

Bytes

Description

7:0

Maximum available capacity of the SSD
(unit: byte)

A.6.1.1.5 Obtaining the Vendor Log Length

This command is used to obtain the length of vendor logs (including the log parsing package,
full logs, and key logs).

This command uses the PRP1, PRP2, Dword10, and Dword12 fields. Enter reserved value 0
for other fields that are not involved.

This command distinguishes the type of a returned log by Sub_OpCode, as shown in the
following table:

Table A-29

Sub_OpCode

Sub_OpCode

Description

0x000009h

Log parsing package

0x080009h

Full logs

0x090009h

Key logs

0x120009h

CoreDump information

0x420009h

Statistical information

The obtained valid log length is returned to the host software as

Table3

Table A-30

Completion Queue Entry Dword 0

Bit

Description

31:0

Valid log length (unit: byte)

A.6.1.1.6 Querying the PCB Version

This command is used to obtain the PCB version.

This command uses the PRP1, PRP2, Dword10, and Dword12 fields. Enter reserved value 0
for other fields that are not involved.

ES3000 V5 NVMe PCIe SSD
User Guide

A Supported NVMe Commands

Issue 07 (2019-03-19)

175

Summary of Contents for ES3000 V5

























































































































































































































































Search results

Summary of Contents for ES3000 V5

Reviews:

Related manuals for ES3000 V5

Brands by name

Popular brands

Huawei ES3000 V5, User Manual

Search results

Summary of Contents for ES3000 V5

Reviews:

Related manuals for ES3000 V5

Brands by name

Popular brands