manualshive.com logo in svg

Huawei AR150 series, Configuration Manual

The Huawei AR150 series is a cutting-edge networking device that provides fast and reliable connectivity. Ensure easy setup and configuration with the included Quick Start Manual. Download the comprehensive user manual for free, exclusively from our website, enabling you to unlock the full potential of your Huawei AR150 series device.

Share
Download
background image

 

4.3.2 Configuring Static DNS

This section describes how to configure static DNS.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

ip host

 

host-name

 

ip-address

A static DNS entry is configured.

Each host name can be mapped to only one IP address. When multiple IP addresses are mapped
to a host name, only the latest configuration takes effect. If multiple host names need to be
resolved, repeat step 2.

----End

4.3.3 Configuring Dynamic DNS

This section describes how to configure dynamic DNS.

Context

To implement dynamic DNS, you need to enable dynamic DNS resolution, configure a DNS
server, and configure a source IP address for the local routing device and a domain name suffix.
If the local routing device uses an IP address allocated by the DHCP server and the information
delivered by the DHCP server to the local routing device contains the DNS server address and
the domain name suffix list, you only need to enable dynamic DNS resolution.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

dns resolve

Dynamic DNS resolution is enabled.

Step 3

(Optional) Run:

dns server

 

ip-address

The IP address of the DNS server is configured.

Step 4

(Optional) Run:

dns server source-ip

 

ip-address

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service

4 DNS Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

85

Summary of Contents for AR150 series






























































































































































































































Reviews:

No comments

Related manuals for AR150 series

Cabletron Systems MMAC-5FNB Overview And Setup Manual preview
MMAC-5FNB
Brand: Cabletron Systems Pages: 21
Ubiquiti U5-24-500W Quick Start Manual preview
U5-24-500W
Brand: Ubiquiti Pages: 23
ADTRAN 617600026F1 Quick Start Manual preview
617600026F1
Brand: ADTRAN Pages: 9
ForeScout CounterACT Quick Installation Manual preview
CounterACT
Brand: ForeScout Pages: 28
TRENDnet TW-200 Specifications preview
TW-200
Brand: TRENDnet Pages: 2
Lanner ICS-P570 User Manual preview
ICS-P570
Brand: Lanner Pages: 63
TP-Link Archer VR500vd Installation Manual preview
Archer VR500vd
Brand: TP-Link Pages: 7
ICP DAS USA ZT-2024 Quick Start Manual preview
ZT-2024
Brand: ICP DAS USA Pages: 8
IDT Tsi310TM User Manual preview
Tsi310TM
Brand: IDT Pages: 207
3Com 3C13640 Installation Manual preview
3C13640
Brand: 3Com Pages: 32
Zalip CDG561 WE~P21 User Manual preview
CDG561 WE~P21
Brand: Zalip Pages: 77
Linksys EtherFast LNE100TX ver. 5 User Manual preview
EtherFast LNE100TX ver. 5
Brand: Linksys Pages: 42
UTStarcom UT-300R2U User Manual preview
UT-300R2U
Brand: UTStarcom Pages: 71
WolfPack 18x18 Card Cage User Manual preview
18x18 Card Cage
Brand: WolfPack Pages: 31
SainSmart Genmitsu CNC Assembly Instruction Manual preview
Genmitsu CNC
Brand: SainSmart Pages: 12
Alcatel-Lucent 7705 SAR-A Installation Manual preview
7705 SAR-A
Brand: Alcatel-Lucent Pages: 154
ZyXEL Communications NBG6616 Quick Start Manual preview
NBG6616
Brand: ZyXEL Communications Pages: 4
IBM Nways 2216 Service And Maintenance Manual preview
Nways 2216
Brand: IBM Pages: 168

Brands by name

Popular brands

Load more brands