manualshive.com logo in svg

Huawei AR150 series, Configuration Manual

The Huawei AR150 series is a cutting-edge networking device that provides fast and reliable connectivity. Ensure easy setup and configuration with the included Quick Start Manual. Download the comprehensive user manual for free, exclusively from our website, enabling you to unlock the full potential of your Huawei AR150 series device.

Share
Download
background image

[RouterB] 

interface ethernet 1/0/0

[RouterB-Ethernet1/0/0] 

undo ipv6 nd ra halt

Step 4

Verify the configuration.

If the configuration succeeds, you can view the configured link-local unicast addresses. The
status of the interfaces and the IPv6 protocol are Up.

# Display information about Ethernet1/0/0 on RouterA.

[RouterA-Ethernet1/0/0] 

display this ipv6 interface

Ethernet1/0/0 current state : 

UP

                                         

IPv6 protocol current state : 

UP

                                                

IPv6 is enabled, link-local address is FE80::2E0:FCFF:FE01:E3                   
  No global unicast address configured                                          
  Joined group address(es):                                                     
    FF02::1:FF01:E3                                                             
    FF02::2                                                                     
    FF02::1                                                                     
  MTU is 1500 bytes                                                             
  ND DAD is enabled, number of DAD attempts: 1                                  
  ND reachable time is 30000 milliseconds                                       
  ND retransmit interval is 1000 milliseconds                                   
  ND advertised reachable time is 0 milliseconds                                
  ND advertised retransmit interval is 0 milliseconds                           
  ND router advertisement max interval 600 seconds, min interval 200 seconds    
  ND router advertisements live for 1800 seconds                                
  ND router advertisements hop-limit 64                                         
  ND default router preference medium                                           
  Hosts use stateless autoconfig for addresses                                  

# Display information about GE 1/0/0 on RouterB.

[RouterB-Ethernet1/0/0] 

display this ipv6 interface

Ethernet1/0/0 current state : 

UP

                                         

IPv6 protocol current state : 

UP

                                                

IPv6 is enabled, link-local address is FE80::A19:A6FF:FE9B:6D3B                 
  No global unicast address configured                                          
  Joined group address(es):                                                     
    FF02::1:FF9B:6D3B                                                           
    FF02::2                                                                     
    FF02::1                                                                     
  MTU is 1500 bytes                                                             
  ND DAD is enabled, number of DAD attempts: 1                                  
  ND reachable time is 30000 milliseconds                                       
  ND retransmit interval is 1000 milliseconds                                   
  ND advertised reachable time is 0 milliseconds                                
  ND advertised retransmit interval is 0 milliseconds                           
  ND router advertisement max interval 600 seconds, min interval 200 seconds    
  ND router advertisements live for 1800 seconds                                
  ND router advertisements hop-limit 64                                         
  ND default router preference medium                                           
  Hosts use stateless autoconfig for addresses                                  

# Display the neighbor entries of RouterA.

[RouterA]

 display ipv6 neighbors

-----------------------------------------------------------------------------   
IPv6 Address : FE80::A19:A6FF:FE9B:6D3B                                         
Link-layer   : 0819-a69b-6d3b                     State : STALE                 
Interface    : Eth1/0/0                           Age   : 27                    
VLAN         : -                                  CEVLAN: -                     
Is Router    : TRUE                                                             
Secure FLAG  : UN-SECURE                                                        
                                                                                
-----------------------------------------------------------------------------   
Total: 1       Dynamic: 1       Static: 0                                       
                                                                                

# Display information about IPv6 neighbors of RouterB.

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service

3 Basic IPv6 Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

80

Summary of Contents for AR150 series






























































































































































































































Reviews:

No comments

Related manuals for AR150 series

E-TOP BR486n User Manual preview
BR486n
Brand: E-TOP Pages: 76
APM AQ-500h Specification Sheet preview
AQ-500h
Brand: APM Pages: 3
Patton electronics 3040/V35 Installation And Operation Manual preview
3040/V35
Brand: Patton electronics Pages: 23
HARTING HAIIC MICA Hardware Development Manual preview
HAIIC MICA
Brand: HARTING Pages: 13
E-Lins H700 Series User Manual preview
H700 Series
Brand: E-Lins Pages: 113
Allied Telesis AT-8550/SP Series Installation Manual preview
AT-8550/SP Series
Brand: Allied Telesis Pages: 114
Belkin AC 1600 DB User Manual preview
AC 1600 DB
Brand: Belkin Pages: 57
BWI PCI Duo/TP User Manual preview
PCI Duo/TP
Brand: BWI Pages: 5
ZyXEL Communications Prestige 100L Quick Start Manual preview
Prestige 100L
Brand: ZyXEL Communications Pages: 170
Talent LT804-A Quick Installation Manual preview
LT804-A
Brand: Talent Pages: 18
TP-Link TL-MR3620 Installation Manual preview
TL-MR3620
Brand: TP-Link Pages: 2
Cyclades AlterPath Manager 2500 Installation, Configuration And User Manual preview
AlterPath Manager 2500
Brand: Cyclades Pages: 368
TP-Link TD-W8101G Quick Installation Manual preview
TD-W8101G
Brand: TP-Link Pages: 16
Buffalo AirStation G54 WLA2-G54 Quick Setup Manual preview
AirStation G54 WLA2-G54
Brand: Buffalo Pages: 8
Planet FGSW-2620 User Manual preview
FGSW-2620
Brand: Planet Pages: 13
Billion BIPAC 7100G Quick Start Manual preview
BIPAC 7100G
Brand: Billion Pages: 14
LevelOne CamCon FCS-4000 User Manual preview
CamCon FCS-4000
Brand: LevelOne Pages: 94
ADTRAN NetVanta 3430 Manual preview
NetVanta 3430
Brand: ADTRAN Pages: 2

Brands by name

Popular brands

Load more brands