manualshive.com logo in svg

Huawei AR150 series, Configuration Manual

The Huawei AR150 series is a cutting-edge networking device that provides fast and reliable connectivity. Ensure easy setup and configuration with the included Quick Start Manual. Download the comprehensive user manual for free, exclusively from our website, enabling you to unlock the full potential of your Huawei AR150 series device.

Share
Download
background image

Example

# Display all the static ARP entries.

<Huawei> 

display arp static

IP ADDRESS      MAC ADDRESS     EXPIRE(M) TYPE        INTERFACE   VPN-INSTANCE  
                                          VLAN/CEVLAN PVC                       
------------------------------------------------------------------------------  
1.1.1.1         0efc-0505-86e3            S--                                   
                                            10/-                                
129.102.0.1     0e00-fc01-0000            S--                                   
11.0.0.1        aa00-fcc0-1200            S--                                   
                                             3/-                                
------------------------------------------------------------------------------  
Total:3         Dynamic:0       Static:3    Interface:0                         

# Display all the ARP entries.

<Huawei> 

display arp all

IP ADDRESS      MAC ADDRESS     EXPIRE(M) TYPE        INTERFACE   VPN-INSTANCE
                                          VLAN/CEVLAN PVC
------------------------------------------------------------------------------
129.102.0.1     00e0-fc01-0000            S--
118.118.118.1   0018-2000-0083            I -         Vlanif11       vpna
10.1.1.1        0018-2000-0083            I -         Vlanif10
100.1.1.116     0018-2000-0083            I -         Eth
100.1.1.118     0001-0c01-3401  14        D-0         Eth
100.1.1.4       0016-ecb7-a879  18        D-0         Eth
------------------------------------------------------------------------------
Total:6        Dynamic:2      Static:1    Interface:3

1.4 Optimizing Dynamic ARP

If dynamic ARP is configured, the system resolves an IP address into an Ethernet MAC address.
Dynamic ARP entries are maintained dynamically by the ARP protocol. You can adjust
parameters of dynamic ARP entries such as the number of ARP probes and the aging time of
dynamic ARP entries to optimize forwarding performance of the AR150/200.

1.4.1 Establishing the Configuration Task

Before optimizing Dynamic ARP, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the data required for the configuration. This
will help you complete the configuration task quickly and accurately.

Applicable Environment

Dynamic ARP entries are maintained dynamically by the ARP protocol. They can be aged out,
updated, or overridden by static ARP entries. When the aging time is reached or the interface is
Down, corresponding dynamic ARP entries are deleted.

The AR150/200 can dynamically create dynamic ARP entries. You can adjust parameters of
dynamic ARP entries to optimize forwarding performance of the AR150/200.

Pre-configuration Tasks

Before optimizing Dynamic ARP, complete the following tasks:

l

Connecting interfaces and setting physical parameters for the interfaces to ensure that the
physical layer status of the interfaces is Up

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service

1 ARP Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

7

Summary of Contents for AR150 series






























































































































































































































Reviews:

No comments

Related manuals for AR150 series

D-Link DIR-862L Manual preview
DIR-862L
Brand: D-Link Pages: 4
D-Link DIR-860L Quick Install Manual preview
DIR-860L
Brand: D-Link Pages: 2
D-Link DIR-850L Resetting Manual preview
DIR-850L
Brand: D-Link Pages: 9
D-Link DIR-850L Setup And Installation Manual preview
DIR-850L
Brand: D-Link Pages: 8
D-Link DIR-865L Specifications preview
DIR-865L
Brand: D-Link Pages: 3
D-Link DIR-867 Quick Install Manual preview
DIR-867
Brand: D-Link Pages: 28
D-Link DIR-X1530 Quick Start Manual preview
DIR-X1530
Brand: D-Link Pages: 2
D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Quick Install Manual preview
DSL-2540B - ADSL2/2+ Modem With EN Router
Brand: D-Link Pages: 12
D-Link DIR-882 Quick Installation Manual preview
DIR-882
Brand: D-Link Pages: 62
NEC Express5800/E120d-M Getting Started preview
Express5800/E120d-M
Brand: NEC Pages: 2
B&B Electronics Elinx EIRP305-T User Manual preview
Elinx EIRP305-T
Brand: B&B Electronics Pages: 19
IBM 8677 - BladeCenter Rack-mountable - Power... Planning And Installation Manual preview
8677 - BladeCenter Rack-mountable - Power...
Brand: IBM Pages: 126
LaCie 301160U - 1TB Ethernet Disk RAID Network Attached... Quick Install Manual preview
301160U - 1TB Ethernet Disk RAID Network Attached...
Brand: LaCie Pages: 5
WAGO 750-459 Manual preview
750-459
Brand: WAGO Pages: 48
GarrettCom Industrial Network Track OSI Brochure preview
Industrial Network Track OSI
Brand: GarrettCom Pages: 10
Thecus N12000 series User Manual preview
N12000 series
Brand: Thecus Pages: 120
Atlantis WebShare 141 WN Quick Start Manual preview
WebShare 141 WN
Brand: Atlantis Pages: 78
Planet FGSW-2620 User Manual preview
FGSW-2620
Brand: Planet Pages: 13

Brands by name

Popular brands

Load more brands