manualshive.com logo in svg

Huawei AR150 series, Configuration Manual

The Huawei AR150 series is a cutting-edge networking device that provides fast and reliable connectivity. Ensure easy setup and configuration with the included Quick Start Manual. Download the comprehensive user manual for free, exclusively from our website, enabling you to unlock the full potential of your Huawei AR150 series device.

Share
Download
background image

Step 4

Verify the configuration.

# Run the 

debugging ip policy-based-route

 command on RouterA to debug the PBR route.

<RouterA> 

debugging ip policy-based-route

<RouterA> 

terminal debugging

<RouterA> 

terminal monitor

# On RouterA, ping the IP address of Loopback0 interface on RouterB and set the packet length
to 80 bytes.

<RouterA> 

ping -s 80 10.1.2.1

 PING 100.1.2.1: 80  data bytes, press CTRL_C to break                         
Mar  9 2011 15:00:35.40.2 RouterA PBR/7/POLICY-ROUTING:IP Policy routing success
 : next-hop : 150.1.1.2                                                         
    Reply from 100.1.2.1: bytes=80 Sequence=1 ttl=254 time=1 ms                 
    Reply from 100.1.2.1: bytes=80 Sequence=2 ttl=254 time=1 ms                 
    Reply from 100.1.2.1: bytes=80 Sequence=3 ttl=254 time=1 ms                 
    Reply from 100.1.2.1: bytes=80 Sequence=4 ttl=254 time=1 ms                 
    Reply from 100.1.2.1: bytes=80 Sequence=5 ttl=254 time=1 ms                 
                                                                                
  --- 100.1.2.1 ping statistics ---                                             
    5 packet(s) transmitted                                                     
    5 packet(s) received                                                        
    0.00% packet loss                                                           
    round-trip min/avg/max = 1/1/1 ms                                           
                                      

# The following information about the PBR route is displayed on RouterA:

<RouterA>
Mar  9 2011 15:00:37.50.2 RouterA PBR/7/POLICY-ROUTING:IP Policy routing success
 : next-hop : 150.1.1.2                                                         
Mar  9 2011 15:00:37.50.3 RouterA PBR/7/POLICY-ROUTING:IP Policy routing success
 : next-hop : 150.1.1.2                                                         
Mar  9 2011 15:00:37.50.4 RouterA PBR/7/POLICY-ROUTING:IP Policy routing success
 : next-hop : 150.1.1.2                                                         
Mar  9 2011 15:00:37.50.5 RouterA PBR/7/POLICY-ROUTING:IP Policy routing success
 : next-hop : 150.1.1.2                              

RouterA forwards the received packets from Ethernet1/0/0 because the next hop address in the
PBR route is 150.1.1.2.

# On RouterA, ping the IP address of Loopback0 interface on RouterB and set the packet length
to 1401 bytes.

<RouterA> 

ping -s 1401 10.1.2.1

  PING 100.1.2.1: 1401  data bytes, press CTRL_C to break                       
Mar  9 2011 15:41:26.350.2 RouterA PBR/7/POLICY-ROUTING:IP Policy routing succes
s : next-hop : 151.1.1.2                                                        
Mar  9 2011 15:41:26.350.3 RouterA PBR/7/POLICY-ROUTING:IP Policy routing succes
s : next-hop : 151.1.1.2                                                        
    Reply from 100.1.2.1: bytes=1401 Sequence=1 ttl=254 time=2 ms               
Mar  9 2011 15:41:26.850.1 RouterA PBR/7/POLICY-ROUTING:IP Policy routing succes
s : next-hop : 151.1.1.2                                                        
    Reply from 100.1.2.1: bytes=1401 Sequence=2 ttl=254 time=2 ms               
Mar  9 2011 15:41:27.340.1 RouterA PBR/7/POLICY-ROUTING:IP Policy routing succes
s : next-hop : 151.1.1.2                                                        
    Reply from 100.1.2.1: bytes=1401 Sequence=3 ttl=254 time=2 ms               
Mar  9 2011 15:41:27.840.1 RouterA PBR/7/POLICY-ROUTING:IP Policy routing succes
s : next-hop : 151.1.1.2                                                        
    Reply from 100.1.2.1: bytes=1401 Sequence=4 ttl=254 time=2 ms               
Mar  9 2011 15:41:28.340.1 RouterA PBR/7/POLICY-ROUTING:IP Policy routing succes
s : next-hop : 151.1.1.2                                                        
    Reply from 100.1.2.1: bytes=1401 Sequence=5 ttl=254 time=2 ms               
                                                                                
  --- 100.1.2.1 ping statistics ---                                             
    5 packet(s) transmitted                                                     
    5 packet(s) received                                                        

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service

8 IP Unicast PBR Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

200

Summary of Contents for AR150 series






























































































































































































































Reviews:

No comments

Related manuals for AR150 series

LAWO edge User Manual preview
edge
Brand: LAWO Pages: 154
Matrix Switch Corporation MSC-5-3232 Product Manual preview
MSC-5-3232
Brand: Matrix Switch Corporation Pages: 61
Moxa Technologies PT-7710 Series Hardware Installation Manual preview
PT-7710 Series
Brand: Moxa Technologies Pages: 2
LaCie 301297U - 1TB Ethernet Disk XP Embedded Network Attached... Online Manual preview
301297U - 1TB Ethernet Disk XP Embedded Network Attached...
Brand: LaCie Pages: 67
VideoWave Adam Device User Manual preview
Adam Device
Brand: VideoWave Pages: 12
Behringer B-Control Fader BCF2000 Quick Start Manual preview
B-Control Fader BCF2000
Brand: Behringer Pages: 13
Digital Equipment ChannelWorks Network Installer Manual preview
ChannelWorks
Brand: Digital Equipment Pages: 90
LanReady AP-952X User Manual preview
AP-952X
Brand: LanReady Pages: 40
Planet FGSW-2620PVS User Manual preview
FGSW-2620PVS
Brand: Planet Pages: 67
TCL HH512V User Manual preview
HH512V
Brand: TCL Pages: 22
Eaton Simatic S7 PG User Manual preview
Simatic S7 PG
Brand: Eaton Pages: 24
Cavalry CAXA Series User Manual preview
CAXA Series
Brand: Cavalry Pages: 16
Siemens SCALANCE XB-000 Brochure preview
SCALANCE XB-000
Brand: Siemens Pages: 4
Siemens Santis ADSL 50 Quick Start Manual preview
Santis ADSL 50
Brand: Siemens Pages: 6
Siemens SIMATIC NET RUGGEDCOM APE1808 Configuration Manual preview
SIMATIC NET RUGGEDCOM APE1808
Brand: Siemens Pages: 28
Siemens Scalance X204-2 Multimode Installation Instructions Manual preview
Scalance X204-2 Multimode
Brand: Siemens Pages: 32
Siemens SCALANCE XR-100WG Series Operating Instructions Manual preview
SCALANCE XR-100WG Series
Brand: Siemens Pages: 44
Siemens RUGGEDCOM RSL910 Installation Manual preview
RUGGEDCOM RSL910
Brand: Siemens Pages: 48

Brands by name

Popular brands

Load more brands