manualshive.com logo in svg

Huawei AR150 series, Configuration Manual

The Huawei AR150 series is a cutting-edge networking device that provides fast and reliable connectivity. Ensure easy setup and configuration with the included Quick Start Manual. Download the comprehensive user manual for free, exclusively from our website, enabling you to unlock the full potential of your Huawei AR150 series device.

Share
Download
background image

On the AR150/200, a Layer 3 Ethernet interface or its sub-interface, a Layer 3 Eth-trunk interface
or its sub-interface, and a VLANIF interface can be configured to select an interface address
pool for IP address allocation.

Step 3

Run:

dhcp server domain-name

 

domain-name

The DNS domain name that is assigned to the DHCP client is configured.

Step 4

Run:

dhcp server dns-list

 

ip-address

 &<1-8>

The IP address of the DNS server used by the DHCP client is configured.

To perform load balancing on traffic and improve network reliability, you can configure multiple
DNS servers. An address pool can be configured with a maximum of eight DNS server addresses.

----End

6.4.5 (Optional) Configuring the Static NetBIOS Service on a DHCP
Client

The NetBIOS server parses host names into IP addresses for the hosts that communicate by using
NetBIOS and run Windows Microsoft operating systems.

Context

Before a host on the DHCP client communicates with another host by using NetBIOS, the
mappings between the host names and IP addresses need to be established. The DHCP client
can be specified as one of the following NetBIOS nodes based on mappings between host names
and IP addresses:

l

B-node: b indicates broadcast. B-nodes obtain mappings between host names and IP
addresses in broadcast mode.

l

P-node: p indicates peer-to-peer. P-nodes obtain mappings between host names and IP
addresses from the NetBIOS server.

l

M-node: m indicates mixed. M-nodes are the p-nodes that have some broadcast features.

l

H-node: h indicates hybrid. H-nodes are the b-nodes that provide the peer-to-peer
communication mechanism.

Procedure

Step 1

Run:

system-view

The system view is displayed.

Step 2

Run:

interface

 

interface-type

 

interface-number

The interface view is displayed.

On the AR150/200, a Layer 3 Ethernet interface or its sub-interface, a Layer 3 Eth-trunk interface
or its sub-interface, or a VLANIF interface can be configured to select an interface address pool
for IP address allocation.

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service

6 DHCP Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

141

Summary of Contents for AR150 series






























































































































































































































Reviews:

No comments

Related manuals for AR150 series

Patton electronics 4520 Specification Sheet preview
4520
Brand: Patton electronics Pages: 2
Patton electronics 4520 Getting Started Manual preview
4520
Brand: Patton electronics Pages: 86
Lanpro LP-N24 Installation Instructions preview
LP-N24
Brand: Lanpro Pages: 5
TC Electronic DB6 User Manual preview
DB6
Brand: TC Electronic Pages: 174
Vanguard 342 Quick Reference Manual preview
342
Brand: Vanguard Pages: 4
Dahua Smart 1U Quick Start Manual preview
Smart 1U
Brand: Dahua Pages: 24
Idis DR-6100 Series Operation Manual preview
DR-6100 Series
Brand: Idis Pages: 86
Paradyne Hotwire 6301 Installation Instructions Manual preview
Hotwire 6301
Brand: Paradyne Pages: 20
Paradyne COMSPHERE 3610 Installation Instructions preview
COMSPHERE 3610
Brand: Paradyne Pages: 2
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Brand: National Instruments Pages: 36
IDT Tsi310TM User Manual preview
Tsi310TM
Brand: IDT Pages: 207
Lutron Electronics Smart Bridge Quick Start Manual preview
Smart Bridge
Brand: Lutron Electronics Pages: 4
EMS 2000 IDU Series User Manual preview
2000 IDU Series
Brand: EMS Pages: 52
ACTi GNR-310 Quick Installation Manual preview
GNR-310
Brand: ACTi Pages: 12
Moxa Technologies PT-7324 Series User Manual preview
PT-7324 Series
Brand: Moxa Technologies Pages: 36
IEI Technology PulM-1G4T-I211 Quick Installation Manual preview
PulM-1G4T-I211
Brand: IEI Technology Pages: 2
Xantech CC62 Installation Instructions preview
CC62
Brand: Xantech Pages: 5
Vaisala TERMBOX-9000 User Manual preview
TERMBOX-9000
Brand: Vaisala Pages: 32

Brands by name

Popular brands

Load more brands