manualshive.com logo in svg

Huawei AR150 series, Configuration Manual

The Huawei AR150 series is a cutting-edge networking device that provides fast and reliable connectivity. Ensure easy setup and configuration with the included Quick Start Manual. Download the comprehensive user manual for free, exclusively from our website, enabling you to unlock the full potential of your Huawei AR150 series device.

Share
Download
background image

<Huawei> 

display tcp status

TCPCB    Tid/Soid Local Add:port        Foreign Add:port      VPNID  State
0b148a24  90 /1    0.0.0.0:23             0.0.0.0:0              14849 Listening
0ba8fb2c  90 /11   100.1.1.116:23         100.1.1.4:1334         0     Established
0ba91254  90 /12   100.1.1.116:23         100.1.1.4:2266         0     Established

# Run the 

display tcp statistics

 command to view the TCP traffic statistics.

<Huawei> 

display tcp statistics

Received packets:                                                               
     Total: 34574                                                               
     Total(64bit high-capacity counter): 34574                                  
     packets in sequence: 2852 (3242 bytes)                                     
     window probe packets: 0, window update packets: 0                          
     checksum error: 0, offset error: 0, short error: 0                         
                                                                                
     duplicate packets: 6 (6 bytes), partially duplicate packets: 0 (0 bytes)   
     out-of-order packets: 0 (0 bytes)                                          
     packets of data after window: 0 (0 bytes)                                  
     packets received after close: 0                                            
                                                                                
     ACK packets: 3757 (126230 bytes)                                           
     duplicate ACK packets: 29083, too much ACK packets: 0                      
                                                                                
Sent packets:                                                                   
    Total: 35094                                                                
     Total(64bit high-capacity counter): 35094                                  
     urgent packets: 0                                                          
     control packets: 0 (including 1 RST)                                       
     window probe packets: 0, window update packets: 0                          
                                                                                
     data packets: 5364 (126736 bytes),    data packets retransmitted: 0 (0 byte
s)                                                                              
     ACK-only packets: 657 (626 delayed)                                        
                                                                                
Other information:                                                              
    Retransmitted timeout: 0, connections dropped in retransmitted timeout: 0   
    Keep alive timeout: 29072, keep alive probe: 29072,     Keep alive timeout, 
so connections disconnected : 0                                                 
    Initiated connections: 0,     accepted connections: 16, established connecti
ons: 16                                                                         
    Closed connections: 13 (    dropped: 10, initiated dropped: 0)              
    Packets dropped with MD5 authentication: 0                                  
    Packets permitted with MD5 authentication: 0                                
    Send Packets permitted with Keychain authentication: 0                      
    Receive Packets permitted with Keychain authentication: 0                   
    Receive Packets Dropped with Keychain authentication: 0     

7.6 Maintaining IP Performance

You can maintain IP performance by clearing IP performance statistics, and monitoring the IP
running status.

7.6.1 Clearing IP Performance Statistics

You can run the following reset commands to clear IP performance statistics.

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service

7 IP Performance Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

187

Summary of Contents for AR150 series






























































































































































































































Reviews:

No comments

Related manuals for AR150 series

ABB RELION REF615R Manual preview
RELION REF615R
Brand: ABB Pages: 66
Paradyne 8820 Installation Manual preview
8820
Brand: Paradyne Pages: 86
D-Link Express Ethernetwork DI-704P Datasheet preview
Express Ethernetwork DI-704P
Brand: D-Link Pages: 2
D-Link Express Ethernetwork DI-704P Quick Install Manual preview
Express Ethernetwork DI-704P
Brand: D-Link Pages: 17
PaloAlto Networks PA-7500 Quick Start Manual preview
PA-7500
Brand: PaloAlto Networks Pages: 3
Qixiang Technology QR310 Installation And Configuration Quick Manual preview
QR310
Brand: Qixiang Technology Pages: 16
Aruba IntroSpect Analyzer 2 Series Quick Start Manual preview
IntroSpect Analyzer 2 Series
Brand: Aruba Pages: 5
HPE FlexNetwork 5130 Series Troubleshooting Manual preview
FlexNetwork 5130 Series
Brand: HPE Pages: 33
Perle IOLAN MDC User Manual preview
IOLAN MDC
Brand: Perle Pages: 491
Top RAMS1000 User Manual preview
RAMS1000
Brand: Top Pages: 21
Ubiquiti airMAX NanoBridge M NBM3 Quick Start Manual preview
airMAX NanoBridge M NBM3
Brand: Ubiquiti Pages: 24
Planet IPOE-171-60W User Manual preview
IPOE-171-60W
Brand: Planet Pages: 20
Pro-Nets Technology Corporation WR750RL User Manual preview
WR750RL
Brand: Pro-Nets Technology Corporation Pages: 48
Honeywell Home LTEM-PA Installation And Setup Manual preview
LTEM-PA
Brand: Honeywell Home Pages: 36
Netstor NA762TB3 User Manual preview
NA762TB3
Brand: Netstor Pages: 17
Vivotek ND9312 User Manual preview
ND9312
Brand: Vivotek Pages: 185
Lancom 1711+ VPN Manual preview
1711+ VPN
Brand: Lancom Pages: 79
Crestron Zum Installation Manual preview
Zum
Brand: Crestron Pages: 2

Brands by name

Popular brands

Load more brands