HT Italia SOLAR300, User Manual

Page: 62 / 160

SOLAR300 - SOLAR300N
EN - 60
The selection parameters of harmonic analysis require the preliminary selection of
voltages or currents inside General Parameter sub-level. The below error screen are
shown in these cases:
Fig. 87: No selected currents error screen
To solve the error situation of above screen select the “Current” inside “General
Parameter” sub-level (see § 5.4.2.7).
Fig. 88: No selected voltages error screen
To solve the error situation of above screen select the “ Voltages ” inside “General
Parameter” sub-level (see § 5.4.2.7)
5.4.2.9. Voltage Anomalies
This option permits to set the control parameters relative to voltage anomalies (sags,
swell, supply breaks – see § 10.4) recording which is completely
independent from
periodic analysis (regulated by integration period). The below screen is shown by meter:
Fig. 89: Voltage Anomalies selection screen