SOLAR300 - SOLAR300N
EN - 105
5.7.3.5. Measures
As an example, below are shown the screens relative to a
three phase 4-wire system
. Similar
consideration can be applied to any other selected system.
In measure mode, the instrument displays the saved values in TRMS as shown in the
following figures:
In this page, the following symbols are used:
V1N
Neutral - Phase L1 Voltage.
V2N
Neutral - Phase L2 Voltage.
V3N
Neutral - Phase L3 Voltage.
VNPE
Neutral - Ground Voltage.
V12
Phase L1 - Phase L2 Voltage.
V23
Phase L2 - Phase L3 Voltage.
V31
Phase L3 - Phase L1 Voltage.
Inv%
% value of the Negative sequence unbalance.
Omo%
% value of the Zero sequence
unbalance.
SEQ
Phase
sequence:
”123”
=> Correct.
”132”
=> Not correct.
”023”
=> No Voltage on B1.
”103”
=> No Voltage on B2.
”120”
=> No Voltage on B3.
”100”
=> No Voltage on B2 and B3.
”020”
=> No Voltage on B1 and B3.
”003”
=> No Voltage on B1 and B2.
Hz
Frequency.
I1
Current on phase L1.
I2
Current on phase L2.
I3
Current on phase L3.
IN
Neutral
current
Fig. 148: Page 1/5 of numeric values for three-phase 4-wire system
The following keys are active on this page:
The
F1
key (or the
PAG
item on the display) advances to the following page
of saved values.
The
ESC
key (or the smart icon on the display) to exit the function and go
back to the “Recording analysis” page (Fig. 143).
Summary of Contents for SOLAR300
Page 1: ...Copyright HT ITALIA 2017 Release EN 2 10 02 05 2017 SOLAR300 SOLAR300N User manual...
Page 2: ......
Page 159: ......
