SOLAR300 - SOLAR300N
EN - 93
The following elements are indicated:
Nominal Voltage
:
Set nominal voltage
High Limit
:
Upper limit voltage
Low Limit
:
Lower limit voltage
Frequency:
System
frequency.
The total number of Voltage Anomalies occurred is also displayed (
Events
)
Within this page, the following keys are active:
The
F3
and
F4
keys (or the item
MOD (+)
and
MOD (-)
on the display) allow choosing
YES
or
NO
for an Interconnected System
The
ENTER
key (or the smart icon
on the display) confirms the choice previously made
and displays the table of the values complying with standard EN50160
The
ESC
key (or the smart icon ) exits the function and goes back to the “EN50160
analysis result” page (see Fig. 129)
This page shows:
The global result of the analysis, highlighted in red, in case it is
Not Ok
and highlighted
in green if it is
Ok
Quantity histogram. The green bar indicates that the parameter complies with standard
EN50160, while the red bar indicates that the parameter does not respect the standard
Fig. 131: EN50160 analysis histogram
Within this page, the following keys are active:
The up and down arrow keys move the vertical bar up and down, thus allowing the
display of the histogram of the quantities in the Analysis EN50160
The
ESC
key (or the smart icon ) exits the function and goes back to the “EN50160
analysis result” page (see Fig. 129)
Summary of Contents for SOLAR300
Page 1: ...Copyright HT ITALIA 2017 Release EN 2 10 02 05 2017 SOLAR300 SOLAR300N User manual...
Page 2: ......
Page 159: ......
