HT Italia SOLAR300, User Manual, Page: 21 / 160

SOLAR300 - SOLAR300N
EN - 19
5.2.3.1. Multi-MPPT photovoltaic system screen – Single-phase output
When SOLAR300N is in connection with MPP300, the display shows the following
parameters:
DC

PV


AC
PARAMETER CAPTION:
PRp:

Performance Ratio (ref. active powers)
Pdc

Inverter input DC power

DC

Photovoltaic panel performance
Pac

Inverter output AC power

AC

Inverter performance
Pnom

Photovoltaic system rated power
If the remote unit SOLAR-02 is connected to the
MPP300, the following values are also available:
Irr

Solar irradiation
Tpv

Default photovoltaic panel temperature
Tenv

Default environmental temperature
When Tenv or Tpv values are displayed in blue, it
means that these values are different from the
default ones, as those measured by SOLAR-02
are not available (see § 5.3.2.4)
Fig. 21: Multi-MPPT photovoltaic system screen – Single-phase output
Pressing the
F3 ( DC ) key displays the following screen:
PARAMETER CAPTION:
Vdcx

Inverter input DC voltage
Idcx

Inverter input DC current
Pdcx

Inverter input DC power
x=1,2,3 according to the number of MPPTs set
Fig. 22: Multi-MPPT photovoltaic system DC screen – Single-phase output
Pressing the
F4 ( AC ) key displays the following screen:
PARAMETER CAPTION:
Vac1

Inverter output phase-neutral AC voltage
Iac1

Inverter output AC phase current
Pac1

Inverter output AC power
Fig. 23: Multi-MPPT photovoltaic system AC screen – Single-phase output