22
WFS 101545 Operations Manual
for 10 minutes. The ALARM indicating light will remain illuminated
reminding the operator that there is an alarm condition.
The Alarm indicator may illuminate along with an audible alarm tone for a
brief moment during start-up until the process flow exceeds set point.
To view the specific cause of the alarm, select the ALARMS page.
NOTE: This does not clear or cancel the fault that caused the alarm.
E-STOP DEPRESSED
This notification simply lets the operator know that the E-Stop
button is depressed and needs to be manually pulled out before the system can be
started
iii.
Water Temp
The water temperature for the Zone 1 Recirculating Water and the Zone 2 Spindle
Water is set on this page. The controls for each zone are labeled. The page also displays
an analog indication of the actual water temperatures. See Figure 5-6
TEMP SET POINT
The desired water temperature is set using the UP/DOWN arrows. The
set point is displayed above the arrows (TEMP SET POINT) and the actual temperature is
displayed below (WATER TEMP).
FIGURE 5-4
FIGURE 5-5
FIGURE 5-6
