HP storageworks 2/32, Installation Manual

Page: 98 / 138

Using the Embedded Web Server
98 Edge Switch 2/32 Installation Guide
2. At the Configure window, click the Switch tab, then click the Network tab.
The Switch page displays with the Network tab selected ( Figure 41 ).
Figure 41: Switch page—Network tab
a. At the IP Address field, type the new value as specified by the customer’s
network administrator (default is 10.1.1.10 , factory preset is 10.1.1.10 ).
b. At the Subnet Mask field, type the new value as specified by the
customer’s network administrator (default is 255.0.0.0).
c. At the Gateway Address field, type the new value as specified by the
customer’s network administrator (default is 0.0.0.0).
3. Click Activate to save the information. The following message box displays
( Figure 42 ).
Figure 42: Network configuration changes activated