HP storageworks 2/32, Installation Manual

Page: 88 / 138

Using the Embedded Web Server
88 Edge Switch 2/32 Installation Guide
Launch EWS
Use the following steps to launch EWS.
Note: Internet access and a standard Web browser is required. HP recommends
Netscape Navigator 4.6 or higher, or Microsoft Internet Explorer 4.0 or higher.
1. Ensure the browser-capable PC and the Ethernet LAN segment (with the
switch attached) are connected.
2. At the PC, launch the browser application (Netscape Navigator or Internet
Explorer).
3. At the browser, enter the IP address of the switch as the internet uniform
resource locator (URL). Use the default IP address of 10.1.1.10, the factory
preset of
10.1.1.10, or the IP address configured while performing “ Configure
Switch Network Information ” on page 38. The Username and Password
Required dialog box displays ( Figure 34 ).
Figure 34: Username and Password Required dialog box
4. Type the default user name and password.
Note: The default user name is Administrator and the default password is password.
The user name and password are case-sensitive.