HP storageworks 2/32, Installation Manual

Page: 42 / 138

Installing and Configuring the Edge Switch 2/32
42 Edge Switch 2/32 Installation Guide
8. At the > prompt, type the user-level password (the default is
password
) and
press Enter . The password is case sensitive. The HyperTerminal window
displays with a
C >
prompt at the top of the window ( Figure 9 ).
Figure 9: HyperTerminal window
9. At the
C>
prompt, type
ipconfig
and press Enter . The HyperTerminal
window displays with configuration information listed as follows:
— MAC Address
— IP Address (default is
10.1.1.10
, factory preset is
10.1.1.10
)
— Subnet Mask (default is
255.0.0.0
).
— Gateway Address (default is
0.0.0.0
)
Only the IP Address , Subnet Mask , and Gateway Address fields are
configurable.
10. Change the IP address, subnet mask, and gateway address as directed by the
customer’s network administrator. To change switch network addresses, type
the following at the
C>
prompt:
ipconfig xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy zzz.zzz.zzz.zzz
Press Enter.