manualshive.com logo in svg

HP storageworks 2/32, Installation Manual

Share
Download
HP storageworks 2/32 Installation Manual Download Page 80

Installing and Configuring the Edge Switch 2/32

80

Edge Switch 2/32 Installation Guide

Connect the Switch to a Fabric

To provide Fibre Channel connectivity between public devices and fabric-attached 
devices, connect the switch to an expansion port (E_Port) of an HP director or 
switch. The switch port to switch port connection is called an interswitch link 
(ISL). To fabric-attach the switch and create an ISL:

1. Ensure the switch is defined to the 

HAFM

 application (defined while 

performing “

Enabling HAFM to Manage the Switch

” on page 46).

2. Ensure the preferred domain ID for the switch is unique and does not conflict 

with the ID of another switch participating in the fabric. To change the 
domain ID, see “

Configure Switch Operating Parameters

” on page 55.

3. Ensure the R_A_TOV and E_D_TOV values for the switch are identical to the 

values for all switches participating in the fabric. To change the values, see 
“

Configure Fabric Operating Parameters

” on page 58.

4. Route a multimode or single mode fiber-optic cable (depending on the type of 

SFP transceiver installed) from a customer-specified E_Port of the switch to 
the switch.

5. Connect the switch-attached fiber-optic cable to the port SFP transceiver.

6. If the switch is managed by an attached HAFM server, go to 

step 7

. If the 

switch is managed by the Embedded Web Server interface:

a.

Choose 

View

 at the left side of the window. The 

View

 window opens with 

the 

Switch

 tab selected and displayed.

b.

At the 

View

 window, click the 

Port Properties

 tab. The 

Port Properties

 

page displays with 

0

 selected, and port information listed for port 0.

c.

Choose the port number of the port used to make this ISL connection.

d. Ensure the 

Operational State

 field displays 

Online 

and the 

Reason

 field 

displays 

N/A 

or is blank. If an ISL segmentation or other problem is 

indicated, refer to the 

HP StorageWorks Edge Switch 2/32 Service Manual

 

to isolate the problem. If no problems are indicated, installation tasks are 
complete.

7. At the HAFM server’s 

Product View

 page, double-click the switch icon. The 

Hardware View

 page for the selected switch displays.

Summary of Contents for storageworks 2/32











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands